Design and construction of pilot sludge drying package for the excess sludge in petrochemical industries: Heavy metals determination in sludge by polarography and atomic absorption spectrometry

Volume 6, Issue 04, Pages xxx-xxx, Dec 2023 *** Field: Analytical Environmental Chemistry

  • Mostafa Hassani, Corresponding Author, Ph.D. in Analytical Chemistry, Department of Applied Chemistry, Faculty of Science, Islamic Azad University, South Tehran Branch, Tehran, Iran Member of the Research Council of Sablan Petrochemical Industries Company, Assaluyeh. Iran
  • Bahareh Azemi Motlagh Master of Environmental Management, Faculty of Natural Resource and Environment, Science and Research Branch, Islamic Azad University, Tehran, Iran
DOI: https://doi.org/10.24200/amecj.v6.i04.315
Keywords: Sludge, Bed design, Wastewater, Heavy metals, Flame and Hydride generation atomic absorption spectrometry, Polarography

Abstract

In this research, according to the high amount of sludge in a petrochemical company, an iron package type of drying sludge bed was made/designed with carbon steel. Then, the drying sludge pond was filled with layers of sand with different mesh sizes. The excess sludge from the sedimentation pond was passed over this bed, and the amount of sludge removed by the bed was obtained at %96. The values of heavy metal and microbial forms were determined using the proposed method based on activated sludge after wastewater treatment. The heavy metal was analyzed using polarography and atomic absorption spectrometry (AAS).  For the validation process, 10 mL of DW was mixed with 1.0 g of dried sludge with pure nitric acid (2% HNO3), and then the solid phase was filtered with the Whatman filter (WF). The concentration of heavy metals (As, Cd, Cu, Pb, Hg, Mo, Ni, Co, Se, Zn) in the remaining solution of sludge (mg kg-1) and wastewater (µg L-1) was extracted/ separated based on sulfur-doped graphene oxide adsorbent (SDGO) by solid-phase microextraction procedure (SPME) before being determined by the flame and hydride generation atomic absorption spectrometry (F-AAS; HG-AAS) which had similar range to the polarography analysis. 

References

M. Nasr, A.M. Negm, Cost-efficient Wastewater Treatment Technologies: Engineered Systems, Springer Nature, 385 pages, 2023. https://link.springer.com/book/10.1007/978-3-031-12902-5

H. D. Stensel, R. Tsuchihashi, F.L. Burton, G. Tchobanoglous, Treatment and Resource Recovery, Fifth edition, McGraw-Hill, New York, NY, 2014. https://www.mheducation.com/

Y. Liu, J.H. Tay, Strategy for minimization of excess sludge production from the activated sludge process, Biotechnol. Adv., 19 (2001) 97-107. https://doi.org/10.1016/S0734-9750(00)00066-5

P. Chudoba, J. Chevalier, J. Chang, B. Capdeville, Effect of anaerobic stabilization of activated sludge on its production under batch conditions at various So/Xo ratios, Water Sci. Technol., 23 (1991) 917-926. https://iwaponline.com/wst/article-pdf/23/4-6/917/112799/917.pdf

T. Kamiya, J. Hirotsuji, New combined system of biological process and intermittent ozonation for advanced wastewater treatment, Water Sci. Technol., 38 (1998) 145-153. https://doi.org/10.2166/wst.1998.0801

L.A. Carrio, A.R. Lopez, P.J. Krasnoff, J.J. Donnellon, Sludge reduction by in-plant process modification, J. Water Pollut. Control Fed., 57 (1985)116-121. https://www.jstor.org/stable/25042541

M. Berg, H.C. Tran, T.C. Nguyen, H.V. Pham, R. Schertenleib, W. Giger, Arsenic contamination of groundwater and drinking water in Vietnam: a human health threat, Environ. Sci. Technol. 35 (2001) 2621-2626. https://doi.org/10.1021/es010027y

M.N. Hoang, P. Le Vo, T.V. Bui, P. Hung, Q.K. Ha, Health risk assessment of arsenic in drinking groundwater: A case study in a central high land area of Vietnam, IOP Conf. Ser.: Earth and Environ. Sci., IOP Publishing, 964 (2022) 012010. https://doi.org/10.1088/1755-1315/964/1/012010

A. Ruczaj, M.M. Brzóska, Environmental exposure of the general population to cadmium as a risk factor of the damage to the nervous system: A critical review of current data, J. Appl. Toxicol., 43 (2023) 66-88. https://doi.org/10.1002/jat.4322.

D. Hou, J. He, C. Lü, L. Ren, Q. Fan, J. Wang, Distribution characteristics and potential ecological risk assessment of heavy metals (Cu, Pb, Zn, Cd) in water and sediments from Lake Dalinouer, China, Ecotoxicol. Environ. Saf., 93 (2013)135-144. https://doi.org/10.1016/j.ecoenv.2013.03.012.

B.R. Stern, M. Solioz, D. Krewski, P. Aggett, T.C. Aw, S. Baker, Copper and human health: biochemistry, genetics, and strategies for modeling dose-response relationships, J. Toxicol. Environ. Health B, 10 (2007) 157-222. https://doi.org/10.1080/10937400600755911

K.F. Lee, E. Li, L.J. Huber, S.C. Landis, A.H. Sharpe, M.V. Chao, Targeted mutation of the gene encoding the low-affinity NGF receptor p75 leads to deficits in the peripheral sensory nervous system, Cell. 69 (1992) 737-749. https://doi.org/10.1016/0092-8674(92)90286-l.

F. Zahir, S.J. Rizwi, S.K. Haq, R.H. Khan, Low-dose mercury toxicity and human health, Environ. Toxicol. Pharmacol., 20 (2005) 351-360. https://doi.org/10.1016/j.etap.2005.03.007

M. Esteban-López, J.P. Arrebola, M. Juliá, P. Pärt, E. Soto, A. Cañas, Selecting the best non-invasive matrix to measure mercury exposure in human biomonitoring surveys, Environ. Res., 204 (2022)112394. https://doi.org/10.1016/j.envres.2021.112394

V.S. Tambat, Y.S. Tseng, P. Kumar, C.W. Chen, R.R. Singhania, J.S. Chang, Effective and sustainable bioremediation of molybdenum pollutants from wastewaters by potential microalgae, Environ. Technol. Innov., 30 (2023)103091. https://doi.org/10.1016/j.eti.2023.103091

K.K. Das, R.C. Reddy, I.B. Bagoji, S. Das, S. Bagali, L. Mullur, The primary concept of nickel toxicity–an overview, J. Basic Clin. Physiol. Pharmacol., 30 (2018) 141-152. https://doi.org/10.1515/jbcpp-2017-0171

S.N. Luoma, T.S. Presser, Emerging opportunities in the management of selenium contamination, Environ. Sci. Technol. 43 (2009) 8483–8487. https://doi.org/10.1021/es900828h

M. Arjomandi, A review: analytical methods for heavy metals determination in environment and human samples, Anal. Methods Environ. Chem. J., 2 (2019) 97-126. https://doi.org/10.24200/amecj.v2.i03.73

B. Paknejad, M. Aliomrani, Is there any relevance between serum heavy metal concentration and BBB leakage in multiple sclerosis patients, Biol. Trace Elem. Res., 190 (2019) 289-294. https://doi.org/10.1007/s12011-018-1553-1

M.K. Abbasabadi, Nanographene oxide modified phenyl methanethiol nanomagnetic composite for rapid separation of aluminum in wastewaters, foods, and vegetable samples by microwave dispersive magnetic micro solid-phase extraction, Food Chem., 347 (2021) 129042. https://doi.org/10.1016/j.foodchem.2021.129042.

M.K. Abbasabadi, Speciation of cadmium in human blood samples based on Fe3O4-supported naphthalene-1-thiol-functionalized graphene oxide nanocomposite by ultrasound-assisted dispersive magnetic micro solid-phase extraction, J. Pharm. Biomed. Anal., 189 (2020) 113455. https://doi.org/10.1016/j.jpba.2020.113455

Z. Karamzadeh, J. Rakhtshah, N.M. Kazemi, A novel biostructure sorbent based on CysSB/MetSB@ MWCNTs for separation of nickel and cobalt in biological samples by ultrasound assisted-dispersive ionic liquid-suspension solid phase micro extraction, J. Pharm. Biomed. Anal., 172 (2019) 285-294. https://doi.org/10.1016/j.jpba.2019.05.003

N. Esmaeili, J. Rakhtshah, E. Kolvari, Ultrasound assisted-dispersive-modification solid-phase extraction using task-specific ionic liquid immobilized on multiwall carbon nanotubes for speciation and determination mercury in water samples, Microchem. J., 154 (2020) 104632. https://doi.org/10.1016/j.microc.2020.104632

M.D. Mobarake, Ultrasound-assisted solid-liquid trap phase extraction based on functionalized multi wall carbon nanotubes for preconcentration and separation of nickel in petrochemical wastewater, J. Anal. Chem., 74 (2019) 865-876. https://doi.org/10.1134/s1061934819090090

N. Esmaeili, J. Rakhtshah, E. Kolvari, A. Rashidi, Rapid speciation of lead in human blood and urine samples based on mwcnts@ dmp by dispersive ionic liquid-suspension-micro-solid phase extraction, Biol. Trace Elem. Res., 199 (2021) 2496-2507. https://doi.org/10.1007/s12011-020-02382-7.

M. Bagheri Hosseinabadi, N. Khanjani, M.D. Mobarake, Neuropsychological effects of long-term occupational exposure to mercury among chloralkali workers, Work, 66 (2020), 491-498. https://doi.org/10.3233/WOR-203194

M. Habibnia, A. Rashidi, A.F. Zarandi, Simultaneously speciation of mercury in water, human blood and food samples based on pyrrolic and pyridinic nitrogen doped porous graphene nanostructure, Food Chem., 403 (2023) 134394. https://doi.org/10.1016/j.foodchem.2022.134394

J. Rakhtshah, Simultaneously speciation and determination of manganese (II) and (VII) ions in water, food, and vegetable samples based on immobilization of N-acetylcysteine on multi-walled carbon nanotubes, Food Chem., 389 (2022) 133124. https://doi.org/10.1016/j.foodchem.2022.133124.

A. Faghihi-Zarandi, Thiol modified bimodal mesoporous silica nanoparticles for removal and determination toxic vanadium from air and human biological samples in petrochemical workers, NanoImpact, 23 (2021) 100339. https://doi.org/10.1016/j.impact.2021.100339.

F. Golbabaei, A. Vahid, A. Faghihi Zarandi, A novel nano-palladium embedded on the mesoporous silica nanoparticles for mercury vapor removal from air by the gas field separation consolidation process, Appl. Nanosci. 12 (2022) 1667-1682. https://doi.org/10.1007/s13204-022-02366-0

R.I. Dick, P.A.Vesilind, The sludge volume index: what is it, J. Water Pollut. Cont. Federation. 41 (1969)1285-1291. https://www.jstor.org/stable/25036678

B. Nazemisalman, N. Bayat, S. Darvish, S. Nahavandi, M. Mohseni, I. Luchian, Polarography can successfully quantify heavy metals in dentistry, Medicina, 58 (2022) 448. https://doi.org/10.3390/medicina58030448

Jr. J. Smith, K. Young, R. Dean, Biological oxidation and disinfection of sludge, Water Res., 9 (1975) 17-24. https://doi.org/10.1016/0043-1354(75)90147-5

N. Miguel, J. Sarasa, Study of Evolution of Microbiological Properties in Sewage Sludge-Amended Soils: A Pilot Experience, Int. J. Environ. Res. Public Health, 17(2020) 6696. https://doi.org/10.3390/ijerph17186696

Published
2023-12-30
How to Cite
Hassani, M., & Azemi Motlagh, B. (2023). Design and construction of pilot sludge drying package for the excess sludge in petrochemical industries: Heavy metals determination in sludge by polarography and atomic absorption spectrometry. Analytical Methods in Environmental Chemistry Journal, 6(04), xxx-xxx. https://doi.org/10.24200/amecj.v6.i04.315
Issue
Vol 6 No 04 (2023): Issue No. Four
Section
Original Article

Copyright (c) 2023 Analytical Methods in Environmental Chemistry Journal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

 JOURNAL PUBLISHING AGREEMENT

 PLEASE PROVIDE US THE FOLLOWING INFORMATION,

 Article entitled:

Corresponding author:

To be published in the journal:

 Your Status

 I am the sole author of the manuscript

  • I am an Iranian government employee.
  • I am a European government employee
  • I am a Asian government
  • None of the above

 I am one author signing on behalf of all co-authors of the manuscript

  • I am an Iranian government employee.
  • I am a European government employee
  • I am a Asian government
  • None of the above

 Please tick the above blanks (as appropriate), review the Journal Publishing Agreement, and then sign and date the document in black ink.

Published Journal Article: the author may share a link to the formal publication through the relevant DOI. Additionally theses and dissertations which contain embedded Published Journal Articles as part of the formal submission may be hosted publicly by the awarding institution with a link to the formal publication through the relevant DOI. Any other sharing of Published Journal Articles is by agreement with the publisher only.

 Signed: ______________________________________ Name printed: ___________________________________________

 Title and Company (if employer representative): _______________________Date: __________________________________

DOWNLOAD COPYRIGHT FORM